SailNet Community - View Single Post - Replacing bulkhead bolted chainplates with deck bolted with a wire strut
View Single Post
  #28  
Old 07-04-2010
mitiempo's Avatar
mitiempo mitiempo is offline
Senior Member
 
Join Date: Sep 2008
Location: Victoria B.C. Canada
Posts: 6,758
Thanks: 0
Thanked 49 Times in 40 Posts
Rep Power: 6
mitiempo will become famous soon enough
I would repair the holes with thickened epoxy and redrill for the bolts after it sets. There should be a backing plate and not just washers on the opposite side of the bulkhead to spread the load. Are the chainplates on the forward or aft side of the bulkhead?
__________________
Brian
Living aboard in Victoria Harbour
Reply With Quote Share with Facebook