SailNet Community - View Single Post - Replacing bulkhead bolted chainplates with deck bolted with a wire strut
View Single Post
post #36 of Old 07-04-2010
Senior Member
mitiempo's Avatar
Join Date: Sep 2008
Location: Victoria B.C. Canada
Posts: 7,801
Thanks: 0
Thanked 111 Times in 102 Posts
Rep Power: 10
Buy biaxial tape long enough to do the tabbing you need in as many layers you wish. You won't need a lot of resin so I'd start with the 32 oz size and the matching 7oz of 206 hardener. If you need more you can get another. I think the next size up is a gallon and you shouldn't need that much unless you are going to be using it for other things. The 404 comes in a container about 4" in diameter and 11" high. That should do the job. Disposable brushes as it's not worth trying to clean them and a 3" basic roller with a few extra sleeves. Latex gloves and acetone to clean up.

Living aboard in Victoria Harbour
mitiempo is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome