SailNet Community - View Single Post - Teak trim plugs and varnish
View Single Post
  #2  
Old 05-22-2006
TUNDAR4 TUNDAR4 is offline
Junior Member
 
Join Date: May 2006
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
TUNDAR4 is on a distinguished road
Cut Plugs

Cut Or Sand Your Plugs 1/16" Less Than The Hole Depth ,after You Apply Your Finish Sand Edges Of Plugs And Holes ,so It Wont Chip Finish,then After You Get The Trim Back In ,apply A Little Glue ,put Plug In. I Use A Padded Block Of Wood Laying Flat On Trim Tap Wood Block Lightly With Hammer.untill Flush,
Reply With Quote Share with Facebook