SailNet Community - View Single Post - Chrysler Mutineer Bailer?
View Single Post
  #5  
Old 07-17-2010
countdemonet's Avatar
countdemonet countdemonet is offline
Ruler of Wind and Wave
 
Join Date: Sep 2007
Location: michigan
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
countdemonet is on a distinguished road
I found the attached .xls file on one of the websites featuring the Bucanneer. I cannot give proper credit to the author as I no longer have the link. Perhaps he or she will see this and come forward to take credit and comment. It's possible the author was "GLEN" who signed the attached .doc file which is a similar text description. I used this to fabricate a pair of these. Sorry, no photos as I later sold the boat. My version was made with a diferent pvc fitting I found which slip fit the inside diameter of the stainless steel housing which eliminated the need for the "A" and "B" O-ring. I also undercut the pvc for the "C" O-ring and used a little rubber cement to hold it in place. Worked as well as the original but they all leak a little.

OK, so the attachments won't attach. PM me and we'll find a way.
__________________
Pearson 34-2

"I don't know where I am but I know I'm not lost"

Last edited by countdemonet; 07-17-2010 at 05:17 PM.
Reply With Quote Share with Facebook