SailNet Community - View Single Post - 16' Floor and Deck Replacement. Advice Please!
View Single Post
  #7  
Old 08-06-2010
DwayneSpeer's Avatar
DwayneSpeer DwayneSpeer is offline
Old Fart
 
Join Date: Oct 2003
Location: Pasco, WA, USA
Posts: 514
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 11
DwayneSpeer is on a distinguished road
Are you absolutely, positively sure that noodles won't get water soaked after a while? I'm not. They weren't designed for long term immersion. Use the right stuff or don't bother.

Half inch ply is OK if it's properly supported; stringers no less than 16 inches apart.

Don't try to glue it down. Use the fiberglass tape and epoxy. It's far more stable.

You don't need to seal the underside with epoxy if you use marine grade plywood. The only need to seal the top side is to make it look good and prevent splinters. If you don't use marine grade ply then you will need to seal the crap out of all sides and do a lot of praying that it lasts more than a few months.

Use any good stain that you want to.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Hey, can one of you guys pass me a crab?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook