SailNet Community - View Single Post - Standard Horizon Depth Sounder replacement
Thread: Standard Horizon Depth Sounder replacement
View Single Post
  #7 (permalink)  
Old 06-19-2006
wwilson's Avatar
wwilson wwilson is offline
Chesapeake Sailor
  
Join Date: Jul 2000
Location: Herrington Harbor, MD
Posts: 579
Rep Power: 12
wwilson is on a distinguished road
Raymarine ST60 or 60+ will work
Mytilene,

My installer friend was unsure about the electrical interface so I went to Raymarine and asked. Their reply follows...

The ST60 does have a 200KHZ output, in theory if you have a depth transducer that rings at 200KHZ it will work.

You may be able to borrow an ST60 to test prior to purchase. If looking to save some money I would try to get an ST60 on E-Bay. The new ST60+ are virtually the same electronics - updated case.

Good luck with the project.

Wayne
Reply With Quote Share with Facebook