SailNet Community - View Single Post - Old new boat - 37' Soverel sloop
View Single Post
post #2 of Old 10-17-2010
Junior Member
Join Date: Sep 2000
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Repairs to 1972 37' Soverel

I have a 37' Soverel which was badly damaged during hurrican Iven a number of years ago. So far the boat has been on the beach drying.
It is time to get started - there is so much work to be done on the hull exterior at the joint where hull and deck join, all standing & running rig needs to be replaced. The mast has been repaired. It broke at the spreader level. All wireing, interior ect., needs to be redone. The engine is out but will need to be reset and tuned and shaft balanced.
The swing keel needs to have new pins and cable installed. Rudder and stearing system needs to be redone.

Question - does anyone out there have a factory specification with installation diagrams for all components installed in an original Soverel 37?

Looking forward to your help


Jim O'Connor
Mobile, AL

Last edited by oshamrock; 10-17-2010 at 03:41 AM. Reason: The Soverel is a 1972 model
oshamrock is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome