Join Date: Sep 2010
Location: North Texas
Thanked 9 Times in 8 Posts
Rep Power: 5
Clean the spider crack area, widen and clean out the cracks with an awl or sharpened screwdriver, clean again with a solvent. Butter the cracks with a filler epoxy compound, sand and prep for painting with a one or two part top side paint.
In my experience-a Dremel with the pointy sanding attachment works tons and tons better for widening the cracks.
This post is made from recycled electrons
A ship in harbor is safe, but that's not why ships are built.
1974 Alcort Minifish-Minifish
2001 Drascombe Lugger-Penelope
2004 Hunter 260-Miss Muffet