SailNet Community - View Single Post - How to blind mount hardware to mast.
View Single Post
  #3  
Old 01-04-2011
tommays's Avatar
tommays tommays is offline
Senior Member
 
Join Date: Sep 2008
Posts: 4,229
Thanks: 1
Thanked 24 Times in 24 Posts
Rep Power: 6
tommays will become famous soon enough
My J24 mast is about .095 wall and will hold #10-24 screws and as long as you use stuff life tef-gel they will come in and out

IMHP 10-24 is better than 10-32 for this type of stuff

If you feel the load is really high then you can make a plate with 4 screw holes and mount the clutch to it and then use 4 screws or rivets to hold the plate to the mast
__________________
1970 Cal 29 Sea Fever

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

1981 J24 Tangent 2930
Tommays
Northport NY


If a dirty bottom slows you down what do you think it does to your boat
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook