SailNet Community - View Single Post - zinc annode grinding
View Single Post
Old 02-04-2011
Fstbttms's Avatar
Fstbttms Fstbttms is offline
I don't discuss my member
Join Date: Feb 2003
Location: Under a boat, in a marina, in the San Francisco Bay
Posts: 1,992
Thanks: 2
Thanked 15 Times in 15 Posts
Rep Power: 12
Fstbttms is on a distinguished road
Originally Posted by sailingdog View Post
Depends on whether it has four bolts holding it together or just two... if it has four, then that would work, if just two, probably not going be worth doing.
1" shaft zincs do not have 4 screws, regardless of brand, so this is a moot point.

I have used a hacksaw to shave zincs and more recently, a portable band saw. That makes quick work of the job.
Reply With Quote Share with Facebook