I'm planning the same thing but I want to stick to all composite so my plan is a fiberglass and carbon fiber dink with vinyalester resin. I'm shooting to keep the weight under 40 lbs. I happen to have a 7 foot pram mold but if I didn't I would build a quick and dirty pram mold using masonite with a little stitch and glue technique. There are plans out there if your not up to designing one yourself. I still plan to use my inflatable but this one will be designed with a removable seat so it can act as a cover for the rolled up inflatable. I never tow the dink so this one is just in case I need to kedge out an anchor or make a quick trip to shore and not bother blowing up the inflatable.