SailNet Community - View Single Post - Yanmar 2qm15 fuel problem
View Single Post
Old 04-08-2011
casey1999's Avatar
casey1999 casey1999 is offline
Senior Member
Join Date: Oct 2010
Location: HI
Posts: 3,117
Thanks: 15
Thanked 32 Times in 31 Posts
Rep Power: 5
casey1999 is on a distinguished road
Originally Posted by pfirth View Post
One other I was bleeding the lines after replacing the injectors, noticed the front cylinder had considerably less volume coming out of the injector fitting than the rear cylinder. Could this cause improper or no atomization leading to a drip? If so, do I get the injector pump rebuilt?
Sounds logical if the injection fuel pipes were bothed loosened the same amount to bleed. Probably be worth having a shop test the pump the reinstal and check injection pump timing. On my Yanmar you need to shim the pump to set the timing.
Reply With Quote Share with Facebook