SailNet Community - View Single Post - Autohelm ST4000 Plus problems
View Single Post
  #2  
Old 04-26-2011
CaptainDan99 CaptainDan99 is offline
Member
 
Join Date: Jan 2010
Location: Colorado
Posts: 78
Thanks: 0
Thanked 3 Times in 1 Post
Rep Power: 5
CaptainDan99 is on a distinguished road
First, carefully check all your connections. Next, with the autopilot on, check the voltage at the control head.

Next check the fluxgate. Use an Ohm meter on low scale. Readings can be off +/1 one ohm

Red to Green
4 ohms
Measurement is taken between the two colors


Red to Yellow
4 ohms

Green to Yellow
8 ohms

Screen to Blue
8 ohms

All other combinations
Open Circuit
Reply With Quote Share with Facebook