SailNet Community - View Single Post - Interprotect Barrier Coat Questions
View Single Post
  #6  
Old 04-29-2011
TejasSailer TejasSailer is offline
Senior Member
 
Join Date: Mar 2004
Location: Austin, TX
Posts: 362
Thanks: 1
Thanked 7 Times in 6 Posts
Rep Power: 11
TejasSailer is on a distinguished road
On VC-17, I've not applied it myself, but have observed the application to my boat several times. A solvent resistant roller was used. It seems quite thin, and only a small amount was mixed at a time. No thinner was used. Six, less than one quart cans were used on our 36' boat for more than one coat, which I think is somewhat more than usual. It dries quicky so there was no wait between coats. Extra coats were applied to leading edges.

The manufactures Web site has instructions.
Reply With Quote Share with Facebook