SailNet Community - View Single Post - Interprotect Barrier Coat Questions
View Single Post
post #7 of Old 04-29-2011
Maine Sail
Senior Member
Maine Sail's Avatar
Join Date: Jan 2003
Location: Maine Coast
Posts: 6,435
Thanks: 23
Thanked 311 Times in 241 Posts
Rep Power: 18
If you apply with a foam roller there should be no real need to sand or roll & tip. For the "hot coating" you want thumbprint dry. This means you can leave a thumbprint but none comes off on your thumb.

For our boat this was roughly a 15-20 minute window at about 72 degrees so one guy was rolling the last coat of 2000e while the next guy followed about 20 minutes behind. The "hot coat" layer is the most important one as it chemically bonds the first paint layer to the epoxy so you don't get peeling paint in a few seasons.

-Maine Sail / CS-36T

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

© Images In Posts Property of Compass Marine Inc.

Maine Sail is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome