SailNet Community - View Single Post - Running lines to cockpit
View Single Post
  #3  
Old 05-26-2011
blt2ski's Avatar
blt2ski blt2ski is offline
Senior Member
 
Join Date: May 2005
Posts: 6,653
Thanks: 0
Thanked 18 Times in 17 Posts
Rep Power: 10
blt2ski will become famous soon enough
Here is a pic of my top starboard side, from left to right, reef 2, outhaul, reef one, spin pole lift, jib/genoa 2 halyard, spin halyard, main boom lift, and outside is for the blade jib sheet.



Starboard is similar,inside to out side, boom vang, cunnngham, jib/genoa 1 halyard(red vs green too), main halyard, spare, tackline, outside is for port blade sheets too. I have an extra on this side, hopefully for the spin pole ring line control at some point in time.

I only have one winch on port side at this time, I hope to move it to the inner side, the starboard outer to the inside, and put some 32's on the outside to better handle the blade sheets.

Marty
__________________
She drives me boat,
I drives me dinghy!
Reply With Quote Share with Facebook