SailNet Community - View Single Post - Yanmar YM oil pressure alarm failure
View Single Post
  #3  
Old 06-09-2011
casey1999's Avatar
casey1999 casey1999 is offline
Senior Member
 
Join Date: Oct 2010
Location: HI
Posts: 2,785
Thanks: 3
Thanked 16 Times in 16 Posts
Rep Power: 4
casey1999 is on a distinguished road
The wire harness have splice connectors- open them up and check for corrosion. Also some of these connectors at the panel. Spray with anti corrosion spray. Trace the wires from the panel to the oil pressure switch- the switch should be located around the oil filter- looks like a 1/2 pipe plug with a wire comming out the top. The water temp switch looks the same but located around the thermostat towards the top of the engine.
Reply With Quote Share with Facebook