SailNet Community - View Single Post - Splicing problem
View Single Post
  #5  
Old 09-02-2011
overbored's Avatar
overbored overbored is offline
Senior Member
 
Join Date: Oct 2010
Location: Dana Point, Ca
Posts: 951
Thanks: 1
Thanked 35 Times in 35 Posts
Rep Power: 4
overbored is on a distinguished road
good that you got it. you can try a smaller diameter fid. open up the cover with a large fid and feed the line with a smaller one. also try wetting the line where it is feeding thru. feed the fid thru shorter sections at a time. feed the line in and out and then go back into the same place it came out and then out futher down the line until you get the overlap you need.
__________________
"FULL TILT" SOVEREL 33
"GOLD RUSH" PRINDLE 16
Reply With Quote Share with Facebook