SailNet Community - View Single Post - HELP!! , Need move a boat NC to WA (Rhodes Bounty II, 40'10 x 28' x 10'3" x 5'9")
View Single Post
  #1  
Old 08-23-2006
sailandoar's Avatar
sailandoar sailandoar is offline
Senior Member
 
Join Date: Mar 2006
Location: Cape Fear, NC, USA
Posts: 208
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 9
sailandoar is on a distinguished road
HELP!! , Need move a boat NC to WA (Rhodes Bounty II, 40'10 x 28' x 10'3" x 5'9")

(40'10 x 28' x 10'3" x 5'9")
I am helping a friend by trying to locate a GOOD boat hauler for a move from Wilmington,NC to Bellingham,WA. The boat needs to be moved in the next 60 days (slips rental expires in Oct.) Can anyone recommend a hauler either by personal experiance or by reputation?
Thanks,
*******************


*******************

Details:

Bounty II
(1950's)

40'10 x 28' x 10'3" x 5'9"

In 1956, Rhodes shrunk a Rhodes 29' lwl sloop (Altair) to 28' lwl. to create the Bounty II. She was 40'10" loa, with a 10'3"beam and 5'9" draft. This was one of the first large stock auxiliary sailboats built in fiberglass. She had a raised doghouse with large windows, a 7/8 sloop rig, and a fiberglass mast. A yawl version was available. Her engine was under the galley floorboards, and she had iron ballast.

Bounty II was built by the Coleman Boat and Plastics Company (later Aeromarine Plastics Corporation) of Sausalito, CA. (The Coleman company had built the Bounty in the 1940s, Bounty II was an obvious name for this new project.) The boat was introduced in 1956 and exhibited in January 1957 at the New York Boat Show.

About a dozen hulls were finished by Palmer Johnson (in Wisconsin). These boats are called "Palmer Johnson Bounties." Given the standards and experience of Palmer Johnson, these versions of the Bounty were probably finished to a very high standard, beyond the normal standard of a regular fiberglass boat builder. Palmer Johnson made some of the specialized hardware for the boat, and may be able to supply hardware now for restoration work.

The Grumman company bought out Coleman in the early 1960s and in 1962 transferred the molds to the Pearson Company in Rhode Island, which Grumman had also bought.

In 1963 Pearson modified the boat a bit and it became the Rhodes 41, discussed below. It is not clear to me if Pearson built Bounty IIs in 1962, when they acquired the molds and before the design work for the Rhodes 41 was done.

Ultimately, more than 100 Bounty IIs were built, according to Dan Spurr (HEART OF GLASS).
**********************

Last edited by sailandoar; 08-24-2006 at 02:46 AM.
Reply With Quote Share with Facebook