SailNet Community - View Single Post - Differences between bottom paints
View Single Post
  #5  
Old 09-26-2011
Fstbttms's Avatar
Fstbttms Fstbttms is offline
I don't discuss my member
 
Join Date: Feb 2003
Location: Under a boat, in a marina, in the San Francisco Bay
Posts: 2,080
Thanks: 4
Thanked 18 Times in 18 Posts
Rep Power: 12
Fstbttms will become famous soon enough
Quote:
Originally Posted by Solarisphere View Post
Micron 66 is out of the question as it's apparently hard to apply yourself.
Quote:
Originally Posted by DrB View Post
- This is not correct. This stuff applies like any other bottom paint.
Both the Interlux web site and product spec sheet indicate that Micron 66 is formulated for professional application.
Quote:
Originally Posted by DrB View Post
-Also, if you sail your boat enough, the Ablate Speed should be a non factor.
Perhaps. But in regions of moderate-to-high fouling, Micron 66 (or any paint) will foul to the point of requiring cleaning, regardless of frequency of use.

Last edited by Fstbttms; 09-26-2011 at 10:46 AM.
Reply With Quote Share with Facebook