SailNet Community - View Single Post - Rhodes 19 underdeck Cockpit issues
View Single Post
post #1 of Old 08-28-2006 Thread Starter
Junior Member
Join Date: Aug 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Rhodes 19 underdeck Cockpit issues

I have a 1966 Rhodes 19 with rotted wood that surrounds the cockpit under the deck. This wood is used to mount the 3 pieces of brightwork (port, starboard and aft) and seats in a channel of fiberglass.

After removing all 20-28 pieces, I was able to salvage some good ones and they are 5-6 inches long, 1 inch wide and cut on bias.

I could try to make these myself, but I was wondering if they could be sourced somewhere, what the best wood to use would be and what would be the best install method.

Final question: Do templates exist for the Rhodes 19 underdeck plywood brackets that mount on the hull and under the deck?

Thanks in advance for any help!
appletim is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome