Originally Posted by MARC2012
I have a w30 but has the old filte.Do have the manuel on bow to bleed.marc
Hi, don't have the manual with me but do this:
Open the union nut on the right closest side of the fuel filter. Pump until diesel doesn't have bubbles is dripping out. Close that union nut. Next, open the blank bolt on the front left side and repeat process. Next, open the big nut on the bottom of the governor and repeat. Next, there are 2 nuts on the top of the governor that are attached together...repeat for this. Finally, open 2 fuel injector pipe union nuts and crank engine with stop lever in run position until fuel drips from pipes with no bubbles. Close the union nuts and start engine. Sorry I don't have the manual...but hope this helps.