Join Date: Nov 2008
Location: West coast lower mainland British Columbia, Canada
Thanked 2 Times in 2 Posts
Rep Power: 7
I hope cutting a hole in the bottom of your boat with limited access to the lower surface works for you! I would be totally freaked out to do it that way. All I had to do was to drill 2 small holes for the bracket bolts on the back & top of the pulley mount. I installed it alone (no helper) with 3M 5200 sealant between the faying surface of the pulley mount & the top surface of the keel slot in the small pocket that's up there. Let us know for sure how it worked out.