Join Date: Dec 2011
Location: Lydia .La.
Thanked 6 Times in 6 Posts
Rep Power: 5
Kenyon 3650 Mast Section
i installed this halyard plate this afternoon , end up only one hole lined up . i put a bolt and nut on the two plates . used a center punch to mark the 3 new holes and drilled each one . adding a bolt and nut in each new hole to keep it lined up .
used butyl tape from the sailnet tutorial to seal it .
i did get some longer bolts its a good thing because they were barley long
enough when i first started between the extra plate and the butyl tape it adds up .
will try and get a picture up soon .
S/V Erin Go Bragh
Last edited by Southron Spirit; 02-07-2012 at 10:38 AM.