SailNet Community - View Single Post - PSC34. Sterntube Diameter.
View Single Post
  #2  
Old 02-15-2012
Norstar's Avatar
Norstar Norstar is offline
Coastal Carolinas
 
Join Date: Aug 2008
Location: Little River, SC
Posts: 95
Thanks: 3
Thanked 4 Times in 2 Posts
Rep Power: 6
Norstar is on a distinguished road
If you have the same setup as on our 1990 34 the cutlass bearing part # is E00700 by Morse Marine. The listed dimensions are 1 X 1.375 X 4
The bearing is a press fit and pretty snug so the stern tube would be just a tad over 1.375
Hope that helps and good luck with the project.

John S
PSC 34 #201
Norstar
Reply With Quote Share with Facebook