SailNet Community - View Single Post - 1983 C&C 29 Mk11 Keel Bolt Question
View Single Post
  #10  
Old 02-16-2012
Sanduskysailor Sanduskysailor is offline
Senior Member
 
Join Date: Aug 2008
Posts: 317
Thanks: 2
Thanked 0 Times in 0 Posts
Rep Power: 7
Sanduskysailor is on a distinguished road
Capt Ed I have the actual C&C 29-11 manual. Unfortunately it is not that good when it comes to details regarding the keel boats. I will send you a scan of the keel boat diagram when I'm back to my office at home late today. It does not give you any details on the keel boat size or specs. The torque figure cited in an earlier post are accurate. I'm guessing that the 2 sizes of bolts are 3/4" and 1". You will probably have to measure your to be sure. I had my fiberglass retorqued my bolts when he faired the keel. I do know you will need a 3/4" ratchet, breaker bar, and a pretty big torque wrench to do the job. I do have a complete service manual for the Yanmar 2GMf if you need it. Let me know. Here is another site with some more info on the boat. C&C 29 Mark II Resource Site
Reply With Quote Share with Facebook