SailNet Community - View Single Post - Nicro Day-Night 2000 solar vent repair
View Single Post
  #29  
Old 02-24-2012
Danny Duquette Danny Duquette is offline
Junior Member
 
Join Date: Feb 2012
Location: Montréal
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Danny Duquette is on a distinguished road
Hi everybody,

I did'nt see anybody trying open the unit as it suppose to. I was looking for a long time and decide to open it from where I saw glue (kind of bubble surronding plastic arround solar panel). I confirme we can open it with help of a heatgun and exacto. You only have to heat the plastic (stop before it's burning) so the glue come a little soft and you can cut the glue with your exacto inch by inch. At the end you only have to remove the solar cell. Take care to not tear off the solar wire by removing the top. Now you could have acces to the motor as you want to remove it and change it

Use silicone to seal around the solar cell when closing the unit when the job is finish.

--- 9$ solution ---
33.5mm x 22mm, 2mm shaft
Model RF-500TB, 1.5 - 12.0v., No load = 2700speed, 0.02Amp, Max load = 2180speed, 0.084Amp., 0.26w
Link 1 : Motor for Solar Projects - 1.5V to 12V DC
Link 2 : Shenzhen Kinmore Motor Co. Ltd >> DC Motor >> Model:RF-500TB

--- Seem to be the same as original motor but don't know where to buy ---
33.5mm x 33mm, 2mm shaft (similar RF-528 same size)
Model RK-528C-2495, 3 - 9v., No load = 6300speed, 0.165Amp, Max load = 5500speed, 0.450Amp., 1.12w
Link 1 : RF-528 24v dc motor for cash registerand vending machine products, buy RF-528 24v dc motor for cash registerand vending machine products from alibaba.com


Click photo for full view


Click photo for full view

I hope this gona by useful for your reparation.

Danny Duquette
Hull #708 - JessyMo
Reply With Quote Share with Facebook