Join Date: Nov 2008
Location: Savannah, GA
Thanked 10 Times in 9 Posts
Rep Power: 8
Thanks for the info; we've considered the same location for our compressor as well as that's where our friend has it installed in his boat, which is not a PSC. My concern with the install in the locker is, as you mentioned, water. Putting it close to the icebox, which puts it forward instead of aft, will still have the same issue.
One thought I've been tossing about is to install it in that locker, but vent it into the engine compartment. Not sure if that will work or not; we're to take possession of it this Sunday.
Bill & Lisa Ballard
S/V Jo Beth
1984 Pacific Seacraft Crealock 34, Hull #16
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
"Twenty years from now you will be more disappointed by the things you didn't do, than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."
- Mark Twain