SailNet Community - View Single Post - Non-skid worn down to fiberglass
View Single Post
  #2  
Old 03-18-2012
killarney_sailor killarney_sailor is offline
Bristol 45.5 - AiniA
 
Join Date: May 2006
Posts: 3,689
Thanks: 5
Thanked 93 Times in 81 Posts
Rep Power: 9
killarney_sailor is on a distinguished road
Re: Non-skid worn down to fiberglass

Essentially what you would need to do is paint these areas with a suitable finish (eg Kiwi Grip?) or with paint with an anti-skid compound added. Fair bit of work, especially if there is much hardware to remove, but not a high-skill job or very costly.
__________________
Back in the water in Grenada - with new main and #2 and cockpit canvas (Santa came early). Will spend the winter and early spring in the Caribbean and then head to Bermuda and the northeast US. Still trying to decide if we will bring the boat to Canada, either in 2015 or 2016.
Reply With Quote Share with Facebook