SailNet Community - View Single Post - removing decals from transom
View Single Post
post #1 of Old 04-17-2012 Thread Starter
Join Date: Sep 2011
Posts: 44
Thanks: 1
Thanked 1 Time in 1 Post
Rep Power: 0
removing decals from transom

Hi Folks,

First off - many thanks for all the boat buying advice. I settled on a 2004 Beneteau 36.7.

I'm in the process of removing the decals from the transom and getting ready to re-name her and was wondering if anyone had any tips.

The declas were only on for 4 years, so they came off quite easily..

So far, I've heated the decals with a heat gun, peeled them off then used some asetone to remove any left over adhesive. Unfortunately, the area that was covered with the decals shows up as a slight yellow tint. Any suggestions on how to get back to white? I'd like to start off with a clean, white transom before applying the new decals.

Many Thanks in advance.

ChuckBuck is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome