SailNet Community - View Single Post - 2012 Oceanis 45 Epoxy barrier coat
View Single Post
  #1  
Old 04-30-2012
kellysails's Avatar
kellysails kellysails is offline
Puget Sound Pounder
 
Join Date: Nov 2008
Location: Bainbridge Island, Port Madison, WA
Posts: 601
Thanks: 18
Thanked 6 Times in 6 Posts
Rep Power: 7
kellysails is on a distinguished road
2012 Oceanis 45 Epoxy barrier coat

Nearing the completion time of my new boat. It is my desire to have a epoxy barrier coat applied to the new hull. Getting some push back from the dealer stating that the sanding of the hull required by epoxy barrier coat will violate the Beneteau blister warranty. Looking at previous Beneteau owners manuals it simply states that you can sand the hull with 400 grit prior to applying a barrier coat.

Ultimately I want to apply an epoxy based antifouling paint to the boat which requires this barrier to be applied.

Question
Any new Beneteau owners out there that have had this issue regarding the blister warranty?

thx

-craig

Last edited by kellysails; 04-30-2012 at 06:47 PM.
Reply With Quote Share with Facebook