Just another Moderator
Join Date: Sep 2005
Location: New Westminster, BC
Thanked 309 Times in 299 Posts
Rep Power: 10
Re: burping on MD7A
Our engine can be difficult to re-establish full circulation after work on the cooling system.. I've found that running the engine initially with the pressure cap off helps it sort itself out... usually only takes 10 minutes or so, after which I replace the cap and let it warm to running temp.
If you've had an air pocket somewhere usually you'll see the H/E reservoir level drop once things are sorted.
1984 Fast/Nicholson 345 "FastForward"
".. there is much you could do at sea with common sense.. and very little you could do without it.."
Capt G E Ericson (from "The Cruel Sea" by Nicholas Monsarrat)