SailNet Community - View Single Post - Identifying a Yanmar
View Single Post
  #2  
Old 05-15-2012
DrB DrB is offline
Senior Member
 
Join Date: Mar 2007
Location: New England
Posts: 953
Thanks: 0
Thanked 5 Times in 5 Posts
Rep Power: 8
DrB will become famous soon enough
Re: Identifying a Yanmar

If it is a fresh water cooled motor (ie has anti-freeze in the heat exchanger), that it is most likely a 3GM30F. The F means Fresh Water cooled. A 3GM30 is raw water cooled. I haven't heard of a 3GMD, but that doesn't mean it couldn't be that.

I have a 3GM30F motor in my boat. If you are looking at the pulley's, the oil filter is to the right, the sea water impeller is to the lower left, behind the lowest pulley and the air intake is on the right side, top, about half down the length.

DrB
__________________
If you liked my advice/response, give me some rep points. If you didn't......well what do you expect, it was free.
Reply With Quote Share with Facebook