SailNet Community - View Single Post - C37 Anchor Locker Partition
View Single Post
  #4  
Old 05-23-2012
DMD DMD is offline
Member
 
Join Date: Jan 2007
Posts: 50
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 8
DMD is on a distinguished road
Re: C37 Anchor Locker Partition

On our '37 we had the same issue with rode from one half of the locker spilling over to the other half. We added a removable extension to the fore-aft divider made from 1/2" plywood. It is held in place on top of the existing fore-aft divider by two pieces of 1/8" X 4" side aluminum strip, one screwed to each side of the divider forming an channel for the extension to sit in. So far it has worked well, and slides out to give more access if needed.

Dave
Crealock 37 #151
"Eowyn"
Reply With Quote Share with Facebook