Join Date: Dec 2011
Location: Lydia .La.
Thanked 6 Times in 6 Posts
Rep Power: 4
Re: swing keel problem
hope this helps
it looks like it's a 1.75" at keel bolt measured at the edge of the board
it has a bushing in there ,cant tell what its made of .
im guessing im missing about one foot off the bottom , next time i put it in the water i
will measure the slot it fits up into .
i am guessing that the keel cable attachment point broke off from corrison and its still tied to the line that goes to the winch and that is pulled up tight to the spot where the cable exits the bottom of the hull .. i cant get my hand up in there .
S/V Erin Go Bragh
Last edited by Southron Spirit; 05-28-2012 at 12:02 PM.