SailNet Community - View Single Post - using 3M marine premium filler
View Single Post
  #9  
Old 06-05-2012
Stumble Stumble is online now
Senior Member
 
Join Date: Feb 2012
Location: New Orleans Louisiana
Posts: 1,863
Thanks: 6
Thanked 42 Times in 40 Posts
Rep Power: 3
Stumble is on a distinguished road
Re: using 3M marine premium filler

...........................West systems 205 vs Marine Tex

Compression yield. 11,400psi...........8,700psi
Tensile strength.......7,900psi.......... 4,000psi
Cost.......................$40/qt.............$120/qt. (the difference gets worse as the quantities get smaller)

Plus you can control the thickness of West, it can be put into syringes to inject in small holes, change the fillers to make everything from faring compound to structual glue.

Sorry for all the periods, I needed them to get things to line up right.

Last edited by Stumble; 06-12-2012 at 03:21 PM.
Reply With Quote Share with Facebook