SailNet Community - View Single Post - Pearson 26 bulkhead delamination
View Single Post
  #7  
Old 06-15-2012
clyanh clyanh is offline
Junior Member
 
Join Date: Jun 2012
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
clyanh is on a distinguished road
Smile Re: Pearson 26 bulkhead delamination

Quote:
Originally Posted by klshoreguy View Post


Thanks for all that information. Looks a like a tough job but with a good return. Door closes just fine right now. Maybe a little "Git Rot" would slow the rotting of the wood. I am trying to attach a picture so you see what I saw. It is under the port side settee. If you have a diagrams or photos on how this is done that would help me understand the process better. Do I need to have the mast down to do this? thanks again.

Getting the boat regardless because I basically getting it for free and I can always sell the engine to recover the costs and either donate the hull or cut her up into little pieces for the trash man. I was told about $1000 to fix this by a local part timer but I think I maybe able to handle this job.
does not look serious. you can patch it yourself. do not need the mast down. the p 26 is an outstanding boat.....had one for 13 years, 18,000+miles. as per picture, even if you did nothing, i don't think you have much to worry about. congrats on buying a great boat
Reply With Quote Share with Facebook