Join Date: Aug 2004
Location: CT / St John USVI
Thanked 0 Times in 0 Posts
Rep Power: 0
Heritage One Ton - Replace Keel Bolts???
For a number of years, I've looked at the tops of the keel bolts in the shallow bilge of our old IOR warrior and quietly said to myself "don't got here". Well, I've decided that it is probably time to investigate how well the bolts have held up over the nearly 36+ years since they were socked home.
They have some corrosion, but I've seen a lot worse in some newer boats. There have been no signs of any movement in the keel / hull bond, and we couldn't seen any cracks along the hull / keel joint during the last haul out. Frankly, the only reason I'm thinking about this is that the boat is going on 40 years old and I'd like to keep sailing her for another decade or so (without any unnecessary excitement)
I know there are a number of SailNet folks who own Heritage One tonners, and I was hoping that someone might be able to share some of their experiences along these lines before I commit myself to one of Dante's rings.
One option I'm considering is to add pairs of sister bolts rather than trying to remove / inspect / replace the originals. Any thoughts, guidance, or warnings would be greatly appreciated.