SailNet Community - View Single Post - have you replaced the outboard motor mount ?
View Single Post
  #6  
Old 06-25-2012
windyway's Avatar
windyway windyway is offline
Senior Member
 
Join Date: Nov 2008
Location: West coast lower mainland British Columbia, Canada
Posts: 260
Thanks: 1
Thanked 2 Times in 2 Posts
Rep Power: 7
windyway is on a distinguished road
Re: have you replaced the outboard motor mount ?

Quote:
Originally Posted by Southron Spirit View Post
i got the garrelick mount it is several inches wider then the old mount i am wondering if epoxy putty would be ok for filling the old 3/8 " holes that the old motor mount used , im going to put a piece of a cutting board between the mount and the hull, but would still like to fill the holes .
tia
Absolutely use epoxy putty. I used watertite from Interlux It's a good idea to ream the holes a little larger so there is a clean surface to adhere to. I also counter sunk the mount holes on the transom so when I put sealant on the new mount it forms kinda like an 'O' ring.
Reply With Quote Share with Facebook