SailNet Community - View Single Post - new 120% genoa
Thread: new 120% genoa
View Single Post
  #1  
Old 07-22-2012
john f john f is offline
Junior Member
 
Join Date: Jul 2012
Location: toronto
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
john f is on a distinguished road
new 120% genoa

I have two questions.
A. I met with a sailmaker yesterday to discuss the purchase of a new sail. he showed me samples of the newer non-woven sails materials. As an average sailor they looked much the same. yet there were two quotes, one for a GMX club racer ($2k) and another higher tech ($3k). The more expensive would last 20% longer. I inherited sails with the boat. I have noticed the composite sails have all aged quicker than the woven sails, and one certainly has developed a noticeable leech curl. OK, so the more expensive plastic sails are meant to hold their shape longer, BUT if this is at the cost of leach curls, isn't it simply better to get good quality dacron, and accept the inevitable "bagging" which would take a long time , and misuse , to develop.?

B. i have decided to go with a max 120% genoa. I usually sail and race short handed. .And the phrf modification allows me a little more latitude for mistakes !
BUT , and here is the rub, there must be a percent of overlap for my boat, around 120% (115%? 130%?) that would provide the maximum drive for the phrf buck. The sailmaker did not think this was important. I know this is a difficult question, but surely the wing shape of the foresail/mainsail combination can be optimised for a particular sailplan.
The boat is a lovely Abbott 33, which I am not sailing as well as she deserve to be handled!

Answers to either A or B will be carefully perused. Thank you.
Reply With Quote Share with Facebook