SailNet Community - View Single Post - Gulfstar 37's Pro's & Cons
View Single Post
  #9  
Old 08-02-2012
DougSabbag's Avatar
DougSabbag DougSabbag is offline
Captain S/V Triumph
 
Join Date: Aug 2011
Location: Boston Yacht Haven
Posts: 802
Thanks: 4
Thanked 7 Times in 6 Posts
Rep Power: 3
DougSabbag is on a distinguished road
Re: Gulfstar 37's Pro's & Cons

For whatever value, I have found Gulfstars to be a good tough boat for the money.
They have "over built" hulls since they were designed before the advent of CAD which allowed a lot less layup (per the computer) to be done to the hull construction.

But, the deck stanchions allow their decks to rot, because they didn't put epoxy around the stanchion bases; so you could have an extensive project in replacing the wood in the deck, and ideally, adding some epoxy where the stanchions bolt through the deck.

Considering the quality of the interior cabins' is mostly veneer, you could also spend a lot of time / effort / money improving that area. Or not, your choice.

If the chainplates in a 37' GS are inside the interior cabin walls, you might want to change those. (see my earlier thread: Triumph) Well, change them anyway. :-)

But, overall, "for the money", a GulfStar is a tough work horse, and will take quite a beating. It is up to you how much pleasure you get out of her.
Reply With Quote Share with Facebook