SailNet Community - View Single Post - Clearing the Holding Tank Vent Hose
View Single Post
post #6 of Old 08-14-2012
Minnewaska
Senior Member
 
Join Date: Feb 2010
Location: Narragansett Bay
Posts: 11,039
Thanks: 46
Thanked 224 Times in 209 Posts
Rep Power: 7
   
Re: Clearing the Holding Tank Vent Hose

Our vent line exits the side of the boat. However, from the inside, you can see that it makes a loop up by the decks and then returns down to the fitting. I'm sure this is for anti-siphon. However, simply directing a hose spray from the outside, is not likely to make it to our tank. If I were to force the hose into the fitting, it would pressurize the tank, as the displaced air would have nowhere to go. The vent is blocked! Even opening the pumpout fitting may not work, as the intake is likely below the tank contents, so air will not escape. Be careful.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Jeanneau 54DS

In the harsh marine environment, something is always in need of repair. Margaritas fix everything.
Minnewaska is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome