Console for stereo,
VHF, and one speaker:
It fits where the
stove should be and adds some counter space (also holds my butane burner).
I already had the electronics; I made the console from scrap plywood I had hanging around plus a small piece of furniture grade stuff for the lid (also hanging around). The only expense was some hardware and spray
paint (about $3).
This is just a working mockup so I would have something for the stereo and
VHF without drilling holes (that I'll likely change my mind about later). The final version will not have the speaker; the stereo &
VHF will be lower and side by side. This will lower the burner; it's a little too close to the shelf behind the unit. I'll also add a fiddle to the edge of the lid and some
cleats to hold the burner in place.