SailNet Community - View Single Post - Using a unidirectional electric windlass
View Single Post
Old 09-26-2012
jackdale's Avatar
jackdale jackdale is online now
Senior Member
Join Date: Dec 2008
Location: Calgary, AB, Canada
Posts: 9,012
Thanks: 27
Thanked 56 Times in 53 Posts
Rep Power: 7
jackdale will become famous soon enough
Re: Using a unidirectional electric windlass

The only other thing I would suggest is keep your hands away from the chain. I have a nice scar on the left thumb from when I learned that lesson.

Paying out the chain as your reverse is essential. Mark the chain and lower enough to hit the bottom, then reverse slowly as you lay out suffficient chain. Use a nylon line as a snubber with slack between the windlass and the snubbing line. Then dig in the anchor at 1500 rpm while taking bearings, then with the engine still running grasp the snubbing line forward of the bow roller; if there is no vibration - you are set.
ISPA Yachtmaster Offshore Instructor Evaluator
Sail Canada Advanced Cruising Instructor
IYT Yachtmaster Coastal Instructor
ASA 201, 203, 204, 205, 206, 214
As I sail, I praise God, and care not. (Luke Foxe)
Reply With Quote Share with Facebook