Join Date: May 2006
Location: Left Coast USA
Thanked 0 Times in 0 Posts
Rep Power: 11
Re: Advice on removing snapped s/s bolts from alu block
But there might workarounds. Depending on the casting shape you might be able to mill (or dremel) a flat for a nut and drill out the offending bolt. You could epoxy fill any holes to the inside. You will need to drill it out anyway. You could try helicoils (sp?) and larger bolts too.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Currently in Long Beach, CA