Join Date: Jun 2011
Thanked 0 Times in 0 Posts
Rep Power: 0
ST60 Windspeed Display
I just finished what is likely my last sail weekend of the season and had a couple oddities occur (better the end of the season than the beginning). For this forum category, I'll stick to the topic.
My ST60 wind display suddenly went to 0.0 when I changed from true to apparent and never came back up. It occurred at the exact moment I pushed the button. The direction indicator is fine and points the correct direction and is calibrated. The masthead unit is turning but 0.0 never changes. I've powered down and back on with no luck. I'd prefer not to re-calibrate it, but I will if I have to.
I've looked for a similar thread, but the ST60 topics are all over the place. I do notice that many people report dashes on the display while mine says 0.0.
Thanks for any help
sv Island Breeze