SailNet Community - View Single Post - Shrink Wrap and mast removal
View Single Post
  #10  
Old 10-05-2012
DonScribner DonScribner is offline
Senior Member
 
Join Date: Jan 2011
Location: Maine
Posts: 579
Thanks: 0
Thanked 14 Times in 14 Posts
Rep Power: 4
DonScribner is on a distinguished road
Re: Shrink Wrap and mast removal

I built a frame out of PVC. 24" high ladder sections tie to the toe rail around the entire perimeter. Then I have PVC lengths with u-clips on then ends that bend over the stored mast and clip to the ladder sections. There's uplift now, that's why the ladders are tied down. I cover the whole thing with a tailored tarp. I bought a huge blue tarp, measured the boat at 4'-0 intervals and cut the tarp to fit on the back lawn. A couple of hours on mama's Singer and Voila! Boat cover. I secure it with bungies so it's pulled tight. It has taken 24" of snow without failure. Someday I'll use the cover as a template and make a real one out of Sunbrella.
Reply With Quote Share with Facebook