SailNet Community - View Single Post - Heat gun & veneer plywood
View Single Post
  #2  
Old 10-13-2012
CalebD's Avatar
CalebD CalebD is offline
Tartan 27' owner
 
Join Date: Jan 2008
Location: NYC
Posts: 4,553
Thanks: 4
Thanked 87 Times in 80 Posts
Rep Power: 7
CalebD will become famous soon enough
Re: Heat gun & veneer plywood

I'd be concerned as you are of causing the outer layer of wood laminate to buckle away from the lower layers. The glue between the layers might, or might not hold fast.
No way to know without trying.
I'd have similar concerns if using a paint stripper.
If it does pull up or buckle you could remove the buckled sections and cover it with thickened epoxy and sand fair.
__________________
"The cure for anything is salt water~ sweat, tears, or the sea." ~Isak Denesen

Everybody has one:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook