SailNet Community - View Single Post - Proper Tool for grinding blisters
View Single Post
  #9  
Old 10-14-2012
SchockT's Avatar
SchockT SchockT is offline
Senior Member
 
Join Date: May 2012
Location: North Vancouver, BC
Posts: 1,425
Thanks: 1
Thanked 27 Times in 25 Posts
Rep Power: 3
SchockT is on a distinguished road
Re: Proper Tool for grinding blisters

The burr I used was one that has been in my tool box for years. They are very common if you go to any good tool store and come in a huge variety of different shapes. I used one that was cylindrical with a round head. It worked really well because you could grind in a very localized area. On the smaller blisters is was just a matter of pressing the tip into the blister and it's gone!

The fourth from the left on the second row is similar to the one I used.

__________________
1979 Santana 30 Tall Rig
Hull#101

Last edited by SchockT; 10-14-2012 at 02:22 AM.
Reply With Quote Share with Facebook