SailNet Community - View Single Post - Propeller Shaft Log
View Single Post
  #2  
Old 11-19-2012
SlowButSteady's Avatar
SlowButSteady SlowButSteady is offline
Senior Slacker
 
Join Date: Feb 2010
Location: SoCal
Posts: 4,223
Thanks: 0
Thanked 17 Times in 15 Posts
Rep Power: 5
SlowButSteady is on a distinguished road
Re: Propeller Shaft Log

Stuffing boxes rarely catastrophically fail. The drip-drip-drip may get faster over time, but it's very unlikely to just start gushing water. That said, having the bilge pump cycle once and hour is indicative that too much water is getting into the boat. If you aren't going to take the boat out for a few days, I would tighten the nut until the drips completely stop, pump the bilge, and wait and see if water is getting into the boat via some other route. If the pump doesn't cycle any more (give it a day or so), adjust the nut to something resembling your surveyor's recommendations. If it does keep cycling, start looking around for another leak.

Also, make sure the hose that connects the stuffing box to the shaft log is in good shape and is properly clamped; four clamps, two on each end. Leaks from that hose or its connections are often unnoticed, as the access to such is even worse that of the stuffing box itself.
__________________
Never forget them. Do something to prevent it from happening again.
Charlotte Bacon, Daniel Barden, Rachel Davino, Olivia Josephine Gay, Ana M. Marquez-Greene, Dylan Hockley, Dawn Hochsprung, Madeleine F. Hsu, Catherine V. Hubbard, Chase Kowalski, Jesse Lewis, James Mattioli , Grace McDonnell, Anne Marie Murphy, Emilie Parker, Jack Pinto, Noah Pozner, Caroline Previdi, Jessica Rekos, Avielle Richman, Lauren Rousseau, Mary Sherlach, Victoria Soto, Benjamin Wheeler, Allison N. Wyatt
Reply With Quote Share with Facebook